| Frequency options |
| N9030B-503 |
Frequency Range, 3 Hz to 3.6 GHz
- Frequency Range: 3 Hz to 3.6 GHz
- Available at time of purchase only
|
| N9030B-508 |
Frequency Range, 3 Hz to 8.4 GHz
- Frequency Range: 3 Hz to 8.4 GHz
- Available at time of purchase only
|
| N9030B-513 |
Frequency Range, 3 Hz to 13.6 GHz
- Frequency Range: 3 Hz to 13.6 GHz
- Available at time of purchase only
|
| N9030B-526 |
Frequency Range, 3 Hz to 26.5 GHz
- Frequency Range: 3 Hz to 26.5 GHz
- Available at time of purchase only
|
| N9030B-544 |
Frequency Range, 3 Hz to 44 GHz
- Frequency Range: 3 Hz to 44 GHz
- Available at time of purchase only
|
| N9030B-550 |
Frequency Range, 3 Hz to 50 GHz
- Frequency Range: 3 Hz to 50 GHz
- Available at time of purchase only
|
| |
| Preamplifier options |
| N9030B-P03 |
Preamplifier, 3.6 GHz
- 20 dB gain
- –171 dBm DANL @1 GHz with preamp and noise floor extension
- Preamplifier for enhanced ability to detect low-level signals
- Available as a post-purchase upgrade
|
| N9030B-P08 |
Preamplifier, 8.4 GHz
- 35 dB gain
- –171 dBm DANL @1 GHz with preamp and noise floor extension
- Preamplifier for enhanced ability to detect low-level signals
- Available as a post-purchase upgrade
|
| N9030B-P13 |
Preamplifier, 13.6 GHz
- 35 dB gain
- –171 dBm DANL @1 GHz with preamp and noise floor extension
- Preamplifier for enhanced ability to detect low-level signals
- Available as a post-purchase upgrade
|
| N9030B-P26 |
Preamplifier, 26.5 GHz
- 35 dB gain
- –171 dBm DANL @1 GHz with preamp and noise floor extension
- Preamplifier for enhanced ability to detect low-level signals
- Available as a post-purchase upgrade
|
| N9030B-P44 |
Preamplifier, 44 GHz
- 40 dB gain
- –171 dBm DANL @1 GHz with preamp and noise floor extension
- Preamplifier for enhanced ability to detect low-level signals
- Available as a post-purchase upgrade
|
| N9030B-P50 |
Preamplifier, 50 GHz
- 40 dB gain
- –171 dBm DANL @1 GHz with preamp and noise floor extension
- Preamplifier for enhanced ability to detect low-level signals
- Available as a post-purchase upgrade
|
| |
| Bandwidth options |
| N9030B-B2X |
分析帶寬，255 MHz
- 分析帶寬擴展到 255 MHz
- ??頻率范圍：3 Hz 至 8.4、13.6、26.5 GHz
- ??需要選件 EP0
- ??捕獲存儲器：2 GB
- ??ADC 分辨率：14 位
- ??可通過售后升級提供
|
| N9030B-B40 |
Analysis Bandwidth, 40 MHz
- Frequency range: 3 Hz to 3.6, 8.4, 13.6, 26.5, 44, 50 GHz
- Capture memory: 1 GB
- ADC resolution: 16 bits
- Available as a post-purchase upgrade
|
| N9030B-B1X |
Analysis Bandwidth, 160 MHz
- Frequency range: 3 Hz to 3.6, 8.4, 13.6, 26.5, 44, 50 GHz
- Capture memory: 1 GB
- ADC resolution: 16 bits
- Available as a post-purchase upgrade
|
| N9030B-B85 |
Analysis Bandwidth, 85 MHz
- Frequency range: 3 Hz to 3.6, 8.4, 13.6, 26.5, 44, 50 GHz
- Capture memory: 1 GB
- ADC resolution: 16 bits
- Available as a post-purchase upgrade
|
| N9030B-B5X |
分析帶寬，510 MHz
- 分析帶寬擴展到 510 MHz
- ??頻率范圍：3 Hz 至 8.4、13.6、26.5 GHz
- ??需要選件 EP0
- ??捕獲存儲器：2 GB
- ??ADC 分辨率：14 位
- ??可通過售后升級提供
|
| |
| Performance Options |
| N9030B-EA3 |
Electronic Attenuator, 3.6 GHz, Upgrade
- Frequency range: 3 Hz to 3.6 GHz
- Step size: 1 dB
- Range: 0 to 24 dB
- Full range including mechanical attenuation: 94 dB
- Available as a post-purchase upgrade
|
| N9030B-EDP |
Enhanced Display Package License
- Spectrogram: Time, amplitude, frequency and delta markers
- Trace Zoom: Both traces active, lower trace a subset of upper trace
- Zone Span: One trace updated at a time, independent bandwidths, point and sweep time
- Available as a post-purchase upgrade
|
| N9030B-EMC |
Basic EMC Functionality License
- CISPR 16-1-1 (2010) fully-compliant detectors
- CISPR band presets to 18 GHz
- Measure at marker with three detectors
- Tune and listen for signal discrimination
- Can be added as a product upgrade
- Available as a post-purchase upgrade
|
| N9030B-FP2 |
Fast Power, up to 40 MHz Bandwidth
- Enables hardware accelerated fast power measurement capability
- 40 MHz single acquisition bandwidth
- Optimized for power measurements such as Channel Power, Adjacent Channel Power, Occupied Bandwidth and Harmonic measurements
- Available as a post-purchase upgrade
|
| N9030B-FT1 |
Frequency Mask Trigger, Basic Detection License
- Capture elusive, intermittent signals for further analysis
- > 15 µs signal duration
- Seamless operation in 89600 VSA Software and N9067C pulse application
- Available as a post-purchase upgrade
|
| N9030B-FT2 |
Frequency Mask Trigger, Optimum Detection License
- Capture elusive, intermittent signals for further analysis
- > 3.6 µs signal duration
- Seamless operation in 89600 VSA Software and N9067C pulse application
- Available as a post-purchase upgrade
|
| N9030B-LNP |
Low Noise Path
- See low-level signals in the presence of high-level signals at microwave frequencies
- Enhanced SHI and noise floor performance
- Available > 3.6 GHz
- Available as a post-purchase upgrade
|
| N9030B-MPB |
Microwave Preselector Bypass
- Excellent wideband amplitude flatness and phase linearity
- Improve measurement repeatability in the higher bands
- Increased IF output bandwidth
- Available as a post-purchase upgrade
|
| N9030B-RTS |
Real-Time Wideband I/Q Data Streaming
- Up to 255 MHz gap-free I/Q data streaming
- Available as a post-purchase upgrade
|
| N9030B-TDS |
Time Domain Scan
- ~90% overlap in the time domain for amplitude accuracy and fast transient capture
- CISPR-compliant amplitude accuracy and weighted detector performance
- Monitor spectrum and amplitude probability distribution
- Available as a post-purchase upgrade
|
| N9030B-EP0 |
增強的相位噪聲 DDS LO
- 增強相位噪聲性能的直接數字合成本地振蕩器
- ??-136 dBc/Hz 相位噪聲（1 GHz 載波，10 kHz 頻偏）
- ??可通過售后升級提供
|
| N9030B-DUA |
Duplex IF RTSA
- Enables control of 2 x 255MHz DIF for optimized frequency and time domain analysis in RTSA mode at the same center frequency
- Able to view RT spectrum, Power vs Time, Powergram, and Spectrogram all at the same time with independent time domain and frequency domain spans
- Requires option B5X and RT1 or RT2
- Available as a post-purchase upgrade
|
| |
| Baseband Inputs |
| N9030B-BBA |
I/Q Baseband Inputs, Analog
- Input impedance: Selectable 50 ohm and 1 Mohm
- Baseband bandwidth: 10 MHz standard/optional 25 MHz or 40 MHz
- Baseband capture memory: 500 MSamples (2 GB) standard
- Available on 3.6, 8.4, 13.6 or 26.5 GHz PXA
- Available as a post-purchase upgrade
|
| |
| Calibration Options |
| N9030B-A6J |
ANSI Z540-1-1994 Calibration
- Ships from the factory with ISO 17025 calibration
- Provides measurement results, uncertainties and specifications with guardbands
- Uncertainties are not included in the determination of the pass/fail status
- Available at time of purchase only
|
| N9030B-AMG |
Calibration + Uncertainties + Guardbanding (Accredited)
- Ships from the factory with ISO 17025 calibration
- Provides measurement results, uncertainties and specifications with guardbands
- Uncertainties are not included in the determination of the pass/fail status
- Available at time of purchase only
|
| N9030B-UK6 |
Commercial Calibration Certificate with Test Data
- Commercial calibration performed by the Keysight factory
- Printed copy of the calibration certificate
- Instructions to download a PDF of the test data report from Infoline
- Available at time of purchase only
|
| |
| Connector Options |
| N9030B-ALV |
Auxiliary Log Video Output
- Output varies about 25 mV/dB
- Top of the screen is 1.6 Volts
- Output impedance is 50 ohms (nominal)
- Available as a post-purchase upgrade
|
| N9030B-C35 |
APC 3.5 mm Connector
- Replaces the standard type-N connector with APC 3.5 mm connector
- Available on the 26.5 GHz PXA (Option 526) only
- Available as a post-purchase upgrade
|
| N9030B-CR3 |
Connector, Wideband IF Output Upgrade
- IF output bandwidth up to 700 MHz with preselector bypassed
- Expandable to 900 MHz with corrections
- Connector: SMA female, 50-ohm impedance nominal
- Available as a post-purchase upgrade
|
| N9030B-CRP |
Connector Rear, Programmable IF Output
- Frequency of the IF output is adjustable from 10 to 75 MHz, in 500 kHz steps
- IF output bandwidth is 100 MHz nominal at 70 MHz center frequency
- Connector type: SMA (female), 50-ohm impedance nominal
- Available as a post-purchase upgrade
|
| N9030B-YAV |
Y-Axis Video Output
- Screen video out looks like the display video
- Log video to the analog out connector is 1 Volt full scale
- Linear video to the analog out is in linear scale
- Available as a post-purchase upgrade
|
| |
| External Mixing |
| N9030B-EXM |
External Mixing
- Analyze signals up to 110 GHz
- Amplitude corrections for conversion loss
- Signal identification, mixer biasing (-5 mA to +5 mA)
- Supports 89600 VSA software
- Available as a post-purchase upgrade
|
| |
| Real time signal analysis |
| N9030B-RT1 |
Real-time analysis up to maximum available BW, basic detection license |
| N9030B-RT2 |
Real-time analysis up to maximum available BW, optimum detection, license |
| |
| Security - PC Features |
| N9030B-SF1 |
Security Features, Exclude Launching Programs
- Ability to limit menu selections and SCPI commands to improve instrument security
- Prevent the launching of Windows programs from the instrument application
- Reduce the instrument’s vulnerability to the effects of unauthorized or undesirable third-party programs or scripts
- Available as a post-purchase upgrade
|
| N9030B-SF2 |
Security Features, Prohibit Saving Results
- Restricts ability to save measurement results or user configuration to improve security
- Prohibits saving results or setups to solid state drive
- Instrument softkeys and SCPI commands eliminate the ability to save or recall user data
- Available as a post-purchase upgrade
|
| N9030B-SSD |
Additional Removable Solid State Drive
- Rugged removable bay, minimum 1,500 insertion cycles
- Fully imaged with the operating system, PXA instrument software, instrument-specific alignment files
- Available as a post-purchase upgrade
|
| |
| Source Connectivity |
| N9030B-ESC |
External Source Control
- Control Keysight signal generators up to 50 GHz
- Control signal sources
- Hardware or software triggering
- Includes a variety of sweep modes
- Adjustable resolution bandwidth and detector settings
- Available as a post-purchase upgrade
|
| |
| Application Software |
| 89601B |
- 89600 VSA 軟件
- 蜂窩、無線連通性、航空航天、國防、通用
- 同時查看多個時域、頻域和調制域視圖
- 先進故障診斷工具包括觸發、記錄和回放
- 支持超過 45 種是德科技測量平臺
|
| N6171A |
MATLAB 軟件
- 創(chuàng )建任意波形
- 定制測量/數據分析例程、儀器應用程序/測試系統
- 自動化測量以及信號與報告生成
- 可通過購買兼容儀器從是德科技直接獲得
|
| N9063C |
配有多點觸控用戶界面、適用于 UXA 的模擬解調測量應用軟件
- 多點觸控用戶界面
- 對 AM、FM、PM 和 FM 立體聲信號進行一鍵式測量
- 顯示調制參數：AM 深度、FM/PM 偏差、THD、SINAD、FM 立體聲
- 可作為售后升級選件
|
| N9068C |
Phase Noise Measurement Application, Multi-touch UI
- 1-touch measurements for analyzing phase noise in frequency domain (log plot) & time domain (spot frequency)
|
| N9069C |
噪聲系數測量應用軟件，多點觸控用戶界面
- 噪聲系數/增益測量
- 一鍵式測量：噪聲系數、增益、Y 因數、有效溫度和熱態/冷態功率密度
- 支持 SNS 346 系列噪聲源和 U7227x 系列 USB 前置放大器
- 可作為售后升級選件
|
| N9071C |
GSM / EDGE / Evo Measurement Application, Multi-Touch UI
- GSM, EDGE and EDGE Evolution including VAMOS1 and Multi-Carrier BTS (MCBTS) per 3GPP GERAN standard
- Base station and mobile station RF transmitter measurements; analog baseband measurements One-button measurements with pass/fail per the standard
|
| N9073C |
W-CDMA/HSPA/HSPA+ Measurement Application, Multi-touch UI
- W-CDMA/HSPA/HSPA+ per 3GPP Release 99 to 8
- Includes uplink/downlink RF transmitter measurements
- Transmit analog baseband measurements with BBIQ hardware
- 1-touch measurements with pass/fail per the standard
|
| N9077C |
WLAN 802.11a/b/g/j/p/n/ac/af/ah/ax Measurement Application, Multi-Touch UI
- Compliant to 802.11a/b/g/j/p/n, 802.11ac, 802.11af, 802.11ah, 802.11ax IEEE series standards for WLAN design/manufacturing test
- Manual settings for 802.11a-turbo mode
- One-button pass/fail measurements per standard
|
| N9080C |
LTE/LTE-Advanced FDD 測量應用軟件，多點觸控用戶界面
- 按照 3GPP 第 8 版到第 13 版標準進行 LTE 和 LTE-Advanced FDD 信號分析
- 使用單一選件提供上行鏈路和下行鏈路測量
- 多達 5 個子載波的載波聚合
- 在具有多點觸控用戶界面的 UXA、PXA、MXA、EXA 和 CXA X 系列信號分析儀中運行
|
| N9082C |
LTE / LTE-Advanced TDD Measurement Application, Multi-touch UI
- LTE and LTE-Advanced TDD per 3GPP Release 8 to 12
- Includes Uplink and downlink measurements in a single option
- Carrier aggregation up to five component carriers
- Runs inside UXA, PXA, MXA, EXA and CXA X-Series signal analyzers with multi-touch UI
|
| N9081C |
Bluetooth Measurement Application, Multi-Touch UI
- Compliant with Bluetooth® Core Specification Version 2.1+ EDR & Low Energy (BR/EDR/LE 4.0/4.2/5.0)
- One-button measurements with pass/fail per the standard
|
| N9084C |
Short Range Communications Measurement Application, Multi-Touch UI
- Compliant with ZigBee (IEEE 802.15.4) and Z-Wave RF transmitter tests
- One-button measurements with pass/fail per the standard
- Runs inside UXA, PXA, MXA, EXA, and CXA X-Series signal analyzers with multi-touch UI
|
| N9067C |
Pulse Measurement Application, Multi-touch UI
- Automatically synchronize to pulsed signals up to 50 GHz and bandwidth of 510 MHz
- View key pulse signal modulation performance indicators and pulses in a time, frequency and phase-domains
- Runs inside X-Series signal analyzers with multi-touch UI
|
| N6141C |
EMI Measurement Application, Multi-Touch UI
- Built-in CISPR and MIL-STD compliant bandwidths, detectors and band presets
- Automated testing to regulatory Limit Lines with user-selected margins
- Amplitude correction for antennas, LISNs, cables, preamps
|
| N9054C |
VMA 矢量調制分析應用軟件，多點觸控用戶界面
- 用于猝發分析的 FFT 頻譜分析和時域分析工具
- 通用模擬和數字調制分析（可選）
- 在具有多點觸控用戶界面的 UXA、PXA、MXA、EXA 和 CXA X 系列信號分析儀中運行
|
| N9061C |
Remote Language Compatibility Application, Multi-Touch UI
- Emulate HP/Keysight 856xE/EC or 8566/8568 spectrum analyzers in remotely controlled, ATE systems
- Migrate 856xE/EC-based or 8566/8568-based ATE systems to seamlessly include a modern signal analyzer
|
| |
| Real Time Recorder |
| N9030B-RTR |
Real-Time Spectrum Recorder and Analyzer Application Example, License
- Real-time spectrum recorder and analyzer application example
- Modifiable application and source code
- Live and saved data operating modes
- Available as a post-purchase upgrade
|
| |
| Accessories |
| 1CM113A |
Rack mount flange kit 177.0mm H (4U) - two flange brackets, 2015 color |
| 1CN103A |
Handle kit 177.0mm H (4U) - two front handles, 2015 color |
| 1CP105A |
Rack mount flange and handle kit 177.0mm H (4U) - two brackets and front handles |
| 1DVR001A |
ROM/CD-R/RW drive |
| 1KBD001A |
USB keyboard-smaller keyboard |
| 1MSE001A |
Mouse |
| MLP001A |
Minimum loss pad, 50 to 75 ohm |
| 1CR014A |
Rack Slide Kit for 17-inch and 20-inch Mounting Holes |
| |
| |
| Additional Documentation |
| N9030B-AB2 |
Chinese localization, user interface and getting started guide |
| N9030B-ABE |
Spanish localization, user interface and getting started guide |
| N9030B-ABF |
French localization, user interface and getting started guide |
| N9030B-ABJ |
Japanese localization, user interface and getting started guide |
| N9030B-AKT |
Russian localization, user interface and getting started guide |
| N9030B-AB1 |
Korean localization, user interface and getting started guide |
